Vehicle Mobile Signal Booster - Telstra

Product Ref: MRE140CAR

Availability: In Stock

Mobile Repeater

$420.00   $495.00
Quick Overview

Car Signal Booster for Telstra

Vehicle Phone Signal Booster

The  Next G Vehicle Booster is a very powerful signal amplifier for vehicle application and is compatible with Australia's Telstra Next G cellular voice and data service

This vehicle repeater provides enhanced mobile coverage while traveling in low signal areas and is compatible with all mobile devices including the latest iPhone and Samsung models.

The Vehicle booster kit works by capturing the low external signal using a magnetic mount aerial on the top of the vehicle. The three meter cable lead connects this signal input to the booster unit. The vehicle booster ensures signal in remote or poor signal areas while travelling.  The amplifier output signal is fed to a small whip aerial that connects to the unit and transmits the signal inside the interior of your vehicle. Each Vehicle Repeater comes with the following

  • Next G 850MHz Vehicle Booster/Amplifier
  • External Dual Band Magnetic-Mount Aerial
  • Internal Whip Aerial
  • 12V DC Car Power Adapter
  • Installation guide

If you have any questions about this product or about any of our other solutions please feel free to contact is about any Vehicle Booster. We will be glad to match your needs for a vehicle kit for any repeater. Thank you and I hope Mobile Repeater can help you choose your Vehicle Repeater.

If you need a home signal boosters we can also help.


Mobile Booster Information

Frequency: 850MHz
Maximum Gain Uplink/Downlink ≧ 55dB ≧ 60dB
Ripple in Band ≦ 5dB
Output Power≧ 27dBm
Spurious Emission (9KHz-1GHz) ≦ -36dBm
Spurious Emission (1GHz-12.75GHz) ≦ -30dBm
Noise Figure @ Max. Gain≦ 6dB (Typical)
Return Loss ≦ 3dB
Time Delay ≦ 0.5μs
MTBF > 50000hours
Power Supply DC 12V    2A
Power Consumption < 10 Watt
Impendence 50 ohm
RF Connector N-Female
Cooling Heatsink convection cooling
Dimensions (DxWxH) 220 x 180 x 20 mm
Weight 1800 Gram
Environment Conditions IP 40
Humidity < 90%
Operating Temperature -10C - 60C

Vehicle Phone Signal Boosters

 Our  Boosters are so straight forward and easy to install.

Watch this short video explaining how it works on a building. It's the same idea for a car, only easier to install!




1. Install the repeaters external antenna

2. Install amplifier indoors where you want to improve coverage

3. Attach the supplied indoor antenna

4. Run cable from external antenna to amplifier

5. Power up amplifier.

6. Rotate outside antenna until best possible signal is achieved indoors. 

Check our Signal Booster extra info Manual for everything you need to know about boosters.