Vehicle Signal Booster - Optus & Vodafone

Product Ref: MRE061CAR

Availability: In Stock

Mobile Repeater

$449.00   $595.00
Quick Overview

The MR Vodafone/Optus Voice Vehicle Booster is a very powerful signal amplifier for vehicle application and is compatible with most Australian Network Operators, including Vodafone and Optus Voice. The external magnetic mount aerial connects via 3 meter coax lead to the booster unit which is located inside the vehicle. The booster has an on-board whip aerial which re-transmits a strong and clear signal within the interior of the vehicle. This booster kit provides enhanced mobile coverage while traveling in low signal areas.

Vehicle Booster Tested for Optus and Vodafone voice networks


The MR Vehicle booster kit works by capturing the low external signal using a magentic mount aerial on the top of the vehicle. The three meter cable lead connects this signal intput to the booster unit. The booster has a a high output power of 27dBm and 55dB gain. The amplifier output signal is fed to a small whip aerial that connects to the unit and transmits the signal inside the interior of your vehicle. Each MR Vehicle Booster kit comes with the following

  • MR Dual Band GSM 900/2100 Vehicle Booster/Amplifier
  • External Dual Band Magnetic-Mount Aerial
  • Internal Whip Aerial
  • 12V DC Car Power Adapter
  • Installation Guide

If you have any questions about this product or about any of our other solutions please feel free to Contact Us. Thank you for choosing Mobile Repeater for your coverage needs.


Technical Specifications:

Uplink/Downlink Frequency (GSM900) 890-915MHz / 935-960MHz (GSM1800) 1710-1785MHz / 1805-1880MHz

Maximum Gain Uplink/Downlink ≧ 55dB ≧ 60dB
Ripple in Band ≦ 5dB
Output Power≧ 27dBm
Spurious Emission (9KHz-1GHz) ≦ -36dBm
Spurious Emission (1GHz-12.75GHz) ≦ -30dBm
Noise Figure @ Max. Gain≦ 6dB (Typical)
Return Loss ≦ 3dB
Time Delay ≦ 0.5μs
MTBF > 50000hours
Power Supply DC 12V    2A
Power Consumption < 10 Watt
Impendence 50 ohm
RF Connector N-Female
Cooling Heatsink convection cooling
Dimensions (DxWxH) 220 x 180 x 20 mm
Weight 1800 Gram
Environment Conditions IP 40
Humidity < 90%
Operating Temperature -10C - 60C