Signal Booster -Voice & 3G-850MHz - 250 SQM - Easy Install

Product Ref: MRE141

Availability: In Stock

Mobile Repeater

$375.00   $445.00
Quick Overview
  • Suitable for: Telstra Voice | 3G
  • Coverage up to 250 sq m
  • Frequency 850 MHz
  • GSM Voice | 3G Data

Telstra Signal Booster - Voice and 3G.

The Telstra Home Essential Signal Booser has been our most popular model for 5 years running! This is a simple to use and powerful booster that will enhancer coverage on Telstra's voice and 3G data bands for coverage areas up to 250 square meters. 

Designed as a Telstra booster for Australia,  it operates on the same frequency as Telstra is instructed to by ACMA and this unit is tested and proven to take in a poor Telstra signal, amplify this signal and broadcast and improve the coverage around your home of office.

Installation is fast and easy. Full technical specification and instructions can be seen below and our trained staff are always on hand once you have it for any questions.

    Required :

    • Telstra - Signal Outdoors (You must have a outdoors signal)
    • Data connection/data package from Telstra to allow access to the network

    The Telstra Home Voice | 3G operates in the 850MHz frequency band and is compatible with Telstra Voice and 3G (NextG) data. This is a complete kit with everything you need to guarantee signal improvement for areas up to 250 square meters. 

    With simple installation and comprehensive cusotmer support, you can go from NO Bars to FULL bars within minutes! Once you have your outdoor antenna connected to the booster, simply connect the indoor coverage antenna and turn the power on. Your phone will see immediate improvement in signal for the designated coverage area around the indoor atnenan. The size of the coverage area will vary depending on the strength of the signal at the location of your outdoor antenna so we recommend mounting as high as possible for best results. Each Telstra Home Voice | 3G kit comes complete with the following:

    1 x 850MHz Voice and 3G signal booser

    1 x 10 meter coax cable to connect the antenna to the booster

    1 x Indoor Coverage Antenna

    1 x Power Supply

    1 x Instruction Manual

    1 x 2-Year Manufacturer Warranty


    For larger coverage areas or Custom Built Corporate Signal Booster. If you would like more information or if you would like to purchase this model please feel free to Contact Mobile Booster.

    To see a larger Repeater see out Medium Building Signal Booster

     

    TECHNICAL SPECIFICATIONS

     

    Gain ( dB) Uplink Gp≥55, Downlink Gp≥60
    Pass band ripple ≤5dB
    Guard band rejection (BW-60dB)≤42MHz, (BW-70dB)≤45MHz
    I/O impedance 50Ω/N connector
    I/O return loss ≤-8dB
    Export power (Po) ≥23dBm
    Intermodulation Attenuation: ≤-40dBc (Po=13dBm)
    Transmission Delay ≤0.5μs
    Ambient temperature -10℃~50℃
    Power supply AC110~220V + - 10%
    Connector Mode N/K for both in-out antenna socket
    Diamension 235 x 178 x 25 mm

    Mobile Boosters for Telstra in Australia

    Signal Boosters seem like they might be confusing, but they're actually pretty straight forward and easy to install. Watch this short video explaining how it works!

     

    INSTALLATION INSTRUCTIONS

    1. Install external antenna

    2. Install amplifier on inside wall.

    3. Attach the supplied indoor antenna

    4. Run cable from external antenna to amplifier

    5. Power up amplifier.

    6. Rotate outside antenna until best possible signal is achieved indoors. 

    For more information on how Signal Boosters work, check our Signal Booster Extra Information Manual 

     

     

    Instalation Instructions Mobile Repeater Australia