Home Essential | 4G

Product Ref: MRE042

Availability: In Stock

Mobile Repeater Australia

$395.00   $439.95
Quick Overview
  • Telstra | Vodafone | Optus
  • Coverage up to 250 sq m
  • Frequency 1800MHz
  • 4G LTE 1800

Australia 4G LTE Signal Booster 

The Home Essential | 4G signal booster kit is guaranteed to improve 4G LTE signal strength for areas up to 250 square meters. NOTE: This product is compatible with Vodafone, Optus and Telstra's 4G 1800MHz Networks. If you're looking for a Telstra booster that covers voice 3G and 4G click here.

Boost your Vodafone or Optus 4G signal within minutes! The Home Essential | 4G kit comes with everything you need and is simple to install. Once set up, turn the unit on and go from no bars to full bars instantly! This Signal Booster will enhance signal strength and data speeds for your 4G compatible devices. 

the Home Essential | 4G works on the 1800MHz 4G LTE frequency band. The setup requires installation of a small and discrete receiver antenna that captures your outdoor signal and feeds the input to the booster. The Booster base unit will then have an output signal fed to an indoor coverage antenna. Once turned on, the booster will transmit a strong and clear signal around the designated coverage area. The actual coverage area may depend on the incoming signal strength, so we recommend mounting the external antenna as high as possible for best results. 

The Home Essential | 4G is specifically designed to operate in the Vodafone, Optus and Telstra 4G LTE 1800MHz frequency band. This signal booster is approved and certified with R&TTE compliance and is guaranteed to improve signal strength for 4G networks operating in these bands.

The is very simple and requires no special skills. We have trained support staff with engineering resources to assist with even the most challenging coverage areas. 

Each Home Essential | 4G comes included with:

  • 1: 4G 1800MHz Signal Booster/Repeater
  • 1: High Gain External Panel Antenna
  • 1: Indoor Whip Antenna
  • 1: 10 meter antenna cable
  • 1: Power source
  • 1: Instruction Manual
  • 1: 2-Year Manufacturer Warrany

If you have any questions about this or other Mobile Repeater products please feel free to Contact Us

To Boost Larger office areas we recommend our Powermax Range of boosters.


Mobile Booster Information


Technical Specifications

Gain ( dB) Uplink Gp≥55, Downlink Gp≥60
Pass band ripple ≤5dB
Guard band rejection (BW-60dB)≤42MHz, (BW-70dB)≤45MHz
I/O impedance 50Ω/N connector
I/O return loss ≤-8dB
Export power (Po) ≥33dBm
Intermodulation Attenuation: ≤-40dBc (Po=13dBm)
Transmission Delay ≤0.5μs
Ambient temperature -10℃~50℃
Power supply AC110~220V + - 10%
Connector Mode N/K for both in-out antenna socket
Diamension 235 x 178 x 25 mm

Signal Boosters for Optus and Vodafone in Australia

 Our Telstra Optus & Vodafone Boosters are so straight forward and easy to install.

Watch this short video explaining how it works!



1. Install the repeaters external antenna

2. Install amplifier indoors where you want to improve coverage

3. Attach the supplied indoor antenna

4. Run cable from external antenna to amplifier

5. Power up amplifier.

6. Rotate outside antenna until best possible signal is achieved indoors. 

Check our Signal Booster extra info Manual for everything you need to know about boosters.